Antiwear Hydraulic oil (EXTRA HEAVY DUTY TYPE)

• Purerol HLP 22
• Purerol HLP 32
• Purerol HLP 46
• Purerol HLP 68
• Purerol HLP 100
• Purerol HLP 150

These heavy duty types of antiwear hydraulic oils are especially required for use in oil operated fluid power systems that are subjected to shock loads, variable speed for continuous operating condition of high severity. These oils are also used for moderately loaded industrial gears, bearings and hydraulic devices with hydro mechanical actuator.

The product performance meets IS: 11656-1986 Specification.

Industrial Gear oils

• Purerol Gear EP 46
• Purerol Gear EP 68
• Purerol Gear EP 100
• Purerol Gear EP 150
• Purerol Gear EP 220
• Purerol Gear EP 320
• Purerol Gear EP 460
• Purerol Gear EP 680
• Purerol Gear EP 1000

These oils are recommended for systems where the operation is under extremely severe and hostile environments such as Gear drives operating at speeds over 3600 rpm and or pitch-line velocities exceeding 1500m/min.

The product performance meets IS: 8406-1993 Specification.

Industrial Gear oils of Rust and Oxidation inhibited(R&0) - equivalent performance standards are also available. It can be made upon request.

General Purpose Machinery Oils

• Purerol machine oil 32
• Purerol machine oil 46
• Purerol machine oil 68
• Purerol machine oil 100
• Purerol machine oil 150
• Purerol machine oil 220
• Purerol machine oil 320
• Purerol machine oil 460

Recommended for general lubrication of industrial equipment bearings, line shafts & for use in the lubrication systems of machine tools, textile machines and other machine parts, which are lubricated by a thin film of oil. Heavier grades of these oils are also used in the lubrication of small open gears, under light duty conditions.

The product performance meets IS: 493(Part I)-1981 Specification.

spindle oils

• Purerol Spindle 2
• Purerol Spindle 5
• Purerol Spindle 10
• Purerol Spindle 12
• Purerol Spindle 22

These oils are premium quality high performance products primarily designed for the lubrication of high-speed spindles in machine tools which is formulated from selected high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water.

The product performance meets IS: 493(Part II)-1981 Specification

refrigeration Compress oil

• Purerol friztech 22
• Purerol friztech 32
• Purerol friztech 46
• Purerol friztech 68

These oils are recommended for a wide range of refrigeration compressors using all conventional refrigerants (CFCs) except sulphur dioxide and are suitable for both reciprocating as well as rotary compressors.

The product performance meets IS: 4578-1989 Specification.

Turbine Oils

• Purerol Turbine 32
• Purerol Turbine 46
• Purerol Turbine 68
• Purerol Turbine 100

These oils can provide exceptional demulsibility, oxidation stability and deposit control which is designed to meet the critical lubrication needs of combined cycle turbines, large heavy-duty industrial gas turbines, and gas and steam turbines with and without loaded gearboxes.

Turbine oils of Rust and Oxidation type(R&0) - equivalent performance standards are also available. It can be made upon request.

The product performance meets IS: 1012-2002 Specification.

Compress oils

• purerol press 32
• purerol press 46
• purerol press 68
• purerol press 100
• purerol press 150
• purerol press 220
• purerol press 320

These oils promote system efficiency by suppressing foaming, releasing trapped air and rapidly separating out condensed water. They also help reduce wear, so that the compressors can continue working as their designers intended.

The Product performance meets ISO DIS – 6521 Specification.

Machine toolway oils

• purerol way 32
• purerol way 46
• purerol way 68
• purerol way H32

These oils are recommended for lubrication of slides and tables of machine tools for both horizontal and vertical guide ways. It exhibits very good oxidation stability and Contains anti-wear, non-drip and oiliness additives.