Metal Working Oils
Innovative Enterprises trust Pure Lubricants
Soluble cutting oil
- Purerol super cut
- Purerol Soluble cutting oil
- Purerol coolant special
These oils are metalworking fluid concentrate which when mixed with water form an emulsion. It is because of their good thermal conductivity, these oils have the ability to dissipate heat more readily than neat cutting oils. Consequently water soluble coolants have become vital in achieving the higher feeds and speeds required to ensure maximum production efficiency. It can be used at 5% concentration in water.
The Product performance meets IS 1115– 1986 Specification.
Semi Synthetic Soluble Cutting oil
- Eco cool soluble 10
It is semi synthetic cutting oil possessing very good anti-rust, anti-corrosion and biocide properties. It has superior cooling and lubricating properties, which impart excellent surface, finish and minimize tool wear. It provides highly stable emulsions in a wide range of water hardness are obtained on adding the oil at recommended dosage levels (3 % to 5 %,) to water with continuous stirring. It can be used in a variety of machining operations on both ferrous and non-ferrous metals.
Neat Cutting oil
- Purerol Neat Cut A 12
- Purerol Neat Cut 32
- Purerol Neat Cut 945
- Purerol Neat Cut 156
- Purerol Neat Cut 123
- Purerol Straight cutting oil
These are a range of highly refined transparent, active & inactive type of cutting oils with extreme pressure properties. These cutting oils are specially developed for wide range of machining operations. They are blended from highly refined high viscosity index mineral oils and carefully selected additives.
The Product performance meets IS 3065– 1985 Specification.
Purerol Honing oil
It is a high performance cutting oil especially developed for super finishing operations e.g. Honning, Lapping etc. However, this oil can also be used in other low to moderately severe machining operations.
Purerol Broaching oil
This oil is formulated with highly refined base Oils fortified with suitable EPadditives of fatty oil and active sulphur for improved surface finish and anti-misting. It is recommended for Heavy duty severe machining operations such as threading, tapping and broaching on ferrous metals and more difficult alloys.
Purerol Draw oil
It is a heavy viscosity product formulated with mineral oils & extreme pressure additive and lubricating agent. It is excellent on ferrous and non-ferrous metals. It can be used for drawing, forming, stamping, punching and other applications.
